Search Walmart
Looking for Answers about this Product?
View all questions >
FITNESS >
SMALL EXERCISE >
ELECTRONICS
Customer Questions & Answers for
SX Combo Heart Rate Monitor
Continuous-read heart rate monitor On-demand heart rate monitor Any touch buttonless technology Calorie-burn monitor Fat-burning zone locator Max heart rate percentage indicator Laser-tuned chronograph Countdown timer Digital time, date and alarm Water-resistant to 50 meters Includes chest belt unit
Questions & Answers for SX Combo Heart Rate Monitor
Question
Can anyone please tell me how to reset this watch after each exercise session?
I have read and reread the pamphlet. It's not the most helpful ever written. What is annoying is that sometimes, it resets by simply holding the reset button. Duh. Other times (I should say MOST TIMES) I can spend upwards of 20 mins trying to figure it out. WHY the difference? WHAT am I doing wrong most times but right the others?
Also, anyone else noticed the calories burned seems a little.... GENEROUS?
Also, anyone else noticed the calories burned seems a little.... GENEROUS?
asked 10 months ago
on SX Combo Heart Rate Monitor
By
DisclaimerII
3 answers
Answers
answer 1
To reset the data collected by the watch you must be in heart monitor/chronograph mode which is the first mode you get to by pressing the mode button once when in std watch mode.
If the timer is running, press and hold the SS button till it stops. Make sure that you hold long enough to stop the timer and not just switch to the next lap. Once the timer is stopped and the watch is no longer collecting data, press and hold the reset button for 2 seconds. This will reset all the counters; time below zone, time in zone, time above zone, calories burned, fat burned, etc. This also clears the counters displayed in the memory mode which is merely a re-display of data collected in the monitor/chronograph mode.
If the timer is running, press and hold the SS button till it stops. Make sure that you hold long enough to stop the timer and not just switch to the next lap. Once the timer is stopped and the watch is no longer collecting data, press and hold the reset button for 2 seconds. This will reset all the counters; time below zone, time in zone, time above zone, calories burned, fat burned, etc. This also clears the counters displayed in the memory mode which is merely a re-display of data collected in the monitor/chronograph mode.
answered 8 months ago
By
schmacker
answer 2
Pressing Reset or SS by accident while working out would make me mad because all the entries would be erased... so I used my common sense and =D I figured out how to reset the watch, you just have to press and hold SS + Reset buttons at the same time. This way you won't erase your entry by accident.
Hope this helps!
Hope this helps!
answered 8 months ago
By
schatzlein16
- Irving Tx
answer 3
I WISH I could figure this out - I'm with you! I spend more time trying to reset it sometimes than I do working out. It's aggravating - all I get are more and more laps. I wish the instructions were clearer in this regard.
The caloric burn is REALLY generous - but I just use it as a general guide anyway.
The caloric burn is REALLY generous - but I just use it as a general guide anyway.
answered 9 months ago
By
Speds09
- Chicago, IL
Question
SX Combo Heart Rate Monitor
I don't have a manual for this watch, and it's obviously complicated. Does anyone know where I can get one from? Thanks
asked 7 months ago
on SX Combo Heart Rate Monitor
By
Jasmynn
- Plano, TX
1 answer
Answers
answer 1
I have a Sportline SX, and I found that the manual for Sportline DUO 1010 is a perfect substitute for the SX manual. You can find it online at:
http://www.sportline.com/manuals/DUO_1010.pdf
Also, I should note that the DUO 1010 manual showed me a cool feature that I never knew existed on my SX: the ability to save battery and LCD life by turning the screen off during non-use by holding in the Reset key for 5 seconds.
http://www.sportline.com/manuals/DUO_1010.pdf
Also, I should note that the DUO 1010 manual showed me a cool feature that I never knew existed on my SX: the ability to save battery and LCD life by turning the screen off during non-use by holding in the Reset key for 5 seconds.
answered 1 month ago
By
CaliforniaMarc
- San Diego
Question
Sportline SX combo heartmonitor
1. What is the actual Sportline model (could not find it in sportline.com)?
2. The contnous mode did not work - how do I program the unit or just make it work?
3. The one touch mode seems to work.
2. The contnous mode did not work - how do I program the unit or just make it work?
3. The one touch mode seems to work.
asked 11 months ago
on SX Combo Heart Rate Monitor
By
bigyos
1 answer
Answers
answer 1
If you have a chest strap, then you have to put that on. Then go to exercise mode. It should feed you the pulse on the watch. If you do not have a chest strap, I would think the one touch is all you have to measure your pulse. Once you take the pulse with one touch, it locks it in until you take it again. You have to also be in exercise mode, then press one touch.
Hope this helps. When all else fails, read the manual :)
Hope this helps. When all else fails, read the manual :)
answered 10 months ago
By
walmartshopper12345xxx
1 of 1
