Remove 4 screws under the vacuum, remove the cover, remove the roller, clean the roller up and make sure it turns freely, slide the belt over the roller, put the roller back in with the belt over it, stretch the belt so it fits over the mother shaft, spin the roller and check for any tight spots or belt alignment issues, if non, put back on cover, turn upside down, plug in Vacuum and turn on checking for proper roller operation, if correct, back to work!
Hi Breeze, just lay your Nano down, remove the screws around the nozzle guard, remove the old belt, loop the new belt around the metal motor shaft, place the other end around the brushroll, replace the nozzle guard and screws, and you're ready to go. Let us know if you need any more help!
Hoover Customer Care
answered 5 months, 1 week ago
Looks like you remove about four screws from the bottom plastic cover, remove it and slip on the new belt. I've not had to replace mine in three years of use.
You have to unscrew the bottom piece. Turn it upside down and unscrew all the screws and u can pull the black bottom piece out,then take out that oiece that turns and u will see the belt. But good luck on finding a belt. I cant find one