Is this product have the ability to attach an amplifier to it so I could increase the reception of HD, VHF, UHF, and local channel television signals?

(see answer)

Asked on: RCA UHF/VHF/Digital Indoor Antenna

See all Walmart Questions and Answers > AUDIO VIDEO Q & A > AUDIO VIDEO ACCESSORIES Q & A > WALL MOUNTS AND STANDS TV Q & A

Customer Questions & Answers for

Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

Save a large amount of space in your living room with the Single Arm Articulating Wall Mount for 37 to 64. With creative innovations and new design the flat panel TV wall mount can accommodate TVs ranging between 37" and 64". Capable of supporting up to 132 lbs, this TV mount sits on the wall with a clearance between 3.1" minimum, 21.5" maximum. The Single Arm TV Wall Mount comes with a capacity to swivel left and right up to 180 degrees. With the ability to tilt 5 degrees up and 15 degrees down this Swivel TV Wall Mount takes you movie watching experience to new level.

Customer Questions & Answers:

96 Questions

449 Answers

Overall Rating:

out of

Questions & Answers for Atlantic Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

Question

tv my

will this fit my plasma lg tv 50 inches ?

asked 5 months, 2 weeks ago

dusko

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

9 answers

Answers

answer 1

Yes. I just purchased this for my 51'' plasma and works great

answered 5 months, 1 week ago

Olygirl1418

answer 2

I would say no, from experience. I just bought this and took it back the same day it arrived at my doorstep. It wouldn't fit my 42" flat screen TV.

answered 5 months, 1 week ago

ndoquinn

answer 3

It fits my 50" plasma flat screen.

answered 5 months, 1 week ago

12shop

answer 4

Yes with no Problem

answered 5 months, 1 week ago

Spagine

answer 5

Yes. I used it for my 55 LCD.

answered 5 months, 1 week ago

Ninjawife1

answer 6

yes just put my 50in up

answered 5 months, 1 week ago

mommasher

answer 7

it fit my 50 inch Samsung. use option two on the installation package I believe it was

answered 5 months, 1 week ago

torbuc

answer 8

Yes, it comes with additional L brackets to mount the large tvs.

answered 5 months, 1 week ago

ConShopper

answer 9

yes i have a 60 inch tv up with it right now

answered 5 months, 2 weeks ago

LEandCE

Question

right or left turn from center extention all the way out

I want to mount this on a side wall. When it is extended all the way forward, can I then turn the TV right or left leaving it in the center full extention position? It doesn't show this.

asked 1 year, 3 months ago

Cybernana

- Utah

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

8 answers

Answers

answer 1

Yes, it swivels pretty far both ways. However, I wouldn't leave it fully extended all of the time because tht will put a lot of stress on the mount and it will leave the TV vulnerable to being damaged if someone walks into it, bumps it with something or attempts to move it by just grabbing an edge.

answered 9 months ago

an anonymous customer

- Minnesota

answer 2

It swings both right and left. It pulls out about 2 feet, so it will swing until the edge of the TV meets the wall. I have a 47 inch TV and it swings almost 90 degrees left or right when fully extended. So it all depends on the width of your TV

answered 1 year, 2 months ago

Vaard

- Worcester, MA

answer 3

yes it will allow you to do this depending on the size of your set. Mine is an RCA 42 inch LCD and it will extend to an almost flat position when fully extended from the mounting wall.

answered 1 year, 2 months ago

Ski64

- St. Marys, WV

answer 4

Yes it can stay centered or you can offset at different degrees if you like. We can turn completely sideways and see from adjacent room

answered 1 year, 2 months ago

deern55

- Toledo, OH

answer 5

yes you can, extends & swings & tilts, best one ive used

answered 1 year, 2 months ago

sheri63

answer 6

Yes, you can.

When the unit is fully extended, the TV can be turned left or right very easily.

The tilt mechanism requires tools to adjust.

Walmart Associate

answered 1 year, 2 months ago

loboonline

- Arkansas

answer 7

That is how I mounted mine. It will extend 3 feet from the wall and will articulate in any direction.

answered 1 year, 2 months ago

Lojeke

- Brighton,Michigan

answer 8

No, but center is a relative position. It fully extends, but the length is offset to the left. It will pivot right and left to a certain degree, but not the full 90 degrees.

answered 1 year, 2 months ago

ThisNickNameFieldIsAPain

- Brookfield, CT

Question

I want to mount this on my covered porch, however we will not be sitting in front, will the screen be able to turn right or left?

asked 1 year, 3 months ago

gigi1946

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

8 answers

Answers

answer 1

answered 9 months ago

an anonymous customer

- Minnesota

answer 2

It swings both right and left up to the point that the edge of the TV meets the wall.

answered 1 year, 2 months ago

Vaard

- Worcester, MA

answer 3

Yes it can stay centered or off set to one side or another. Very versatile with a double hinged articulating arm

answered 1 year, 2 months ago

deern55

- Toledo, OH

answer 4

The screen will rotate 180 degrees. Yes it will work.

answered 1 year, 2 months ago

Lojeke

- Brighton,Michigan

answer 5

With it pushed up aginst the wall, it will extend 18" from the wall and will then turn 90 deg. left or right. it will also turn down up to 15 deg. or up 5 deg.

answered 1 year, 3 months ago

CheekyDelinquint

- Florida

answer 6

most def. This will pull out from the wall for you and turn both left and right. Watch the vidio that they have for this product. Its a awesome product and you wont be sorry. We love it and i know you will too..

answered 1 year, 3 months ago

beachbum2051959

- Wiildwood, NJ

answer 7

Yes. We have this mounted on our wall in the living room and we pull it all the way out and swivel it to the left to view in our dining room. It is very easy to use and to turn.

answered 1 year, 3 months ago

eherb

answer 8

yes it will, and it can also slightly tilt the tv forward and back.

answered 1 year, 3 months ago

samurai865

- North Carolina

Question

Will this mount work to recess my 46" samsung into the wall so I could swing it out to access the back for connections?

asked 1 year, 3 months ago

handyman7

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

7 answers

Answers

answer 1

Yes, but it might be better to put a strong board across the opening so the TV isn't always hanging out from its mounting.

answered 9 months ago

an anonymous customer

- Minnesota

answer 2

Pulls out about 18-20 inches from wall then you can completely turn 90 degrees and see everything easily to make all your connections. Very nice unit.

answered 1 year, 2 months ago

deern55

- Toledo, OH

answer 3

Sorry I would need your tv model number. Look up the manual for it and look for the wall mount screw size pattern. it should 200x600 mm 400x600mm then go back and look to see if this mount supports that size.

answered 1 year, 2 months ago

Lojeke

- Brighton,Michigan

answer 4

yes. This mount is great. You can pull it out away from the wall to get to the back of the tv and also it will turn left or right if you have any plug in on the sides of the tv.

answered 1 year, 3 months ago

beachbum2051959

- Wiildwood, NJ

answer 5

yes. i mounted a 6o" samsung plasma and it works fine

answered 1 year, 3 months ago

ncpoppa

- roanoke rapids, north carolina

answer 6

I dont know if it will work on your samsung BUT it works on my mitsubishi tv!! everyone told me it wouldnt but i knew it would! try it out. you can always return it if it dosnt!!

answered 1 year, 3 months ago

mommyV81

- mommy and daddy world!

answer 7

Yes... It will swing out over a foot from the mounting surface and the cables can be kept along the mount arms with velcro straps.

answered 1 year, 3 months ago

Neriel

- Mannford, OK

Question

Can the mount be easily adjusted to keep the TV centered on the wall, left to right, if the studs you screw it into aren't centered on the wall?

Also wondering if there is a problem w/crooked brackets as one customer seemed to have?

asked 1 year, 4 months ago

an anonymous customer

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

7 answers

Answers

answer 1

Yes, you can fine tune the position if your studs aren't in the exact center of where you want the TV.

answered 9 months ago

an anonymous customer

- Minnesota

answer 2

Well, but it will have to be pulled out quite a bit if you want to center it in a place other than its normal center. not recommended. I was going to cut out the drywall and build a brace between the studs if I wasnt lucky enough to have it centered where I wanted it.

I had no bent brackets or any problems with the product.

answered 1 year, 2 months ago

Vaard

- Worcester, MA

answer 3

You could either span a 1x2 between you studs then screw into this board or at least hit one stud and use the wall anchor for the second side. The crooked issue: you can level the bracket on the wall and level the bracket/plate on the TV and I guarantee it will not come out level....BUT it is easily adjusted....pull the TV out and turn sideways, loosen the screws on the plate on the TV itself...not too far that it will dismount....but you will notice the TV MOVES/Slips and this is where you do your final LEVELING and then tighten the screws back up...your done! Very versatile bracket.

answered 1 year, 2 months ago

deern55

- Toledo, OH

answer 4

Yes it can.

answered 1 year, 2 months ago

Lojeke

- Brighton,Michigan

answer 5

Yes most def. I have been reading a lot of the comments about peoples concerns concerning the studs. Please understand that you can also use anchors with this product. They come with your wall mount. They are very large and will work also without having to use studs. Just follow the directions on mounting section and you will be fine. I love it and you will too

answered 1 year, 3 months ago

beachbum2051959

- Wiildwood, NJ

answer 6

Yes- small adjustments can be easily made with this mount to center and resolve minor degrees of tilt of the TV.

answered 1 year, 3 months ago

Bluegroove

- Morrisville PA

answer 7

The mount can be adjusted to keep the TV centered on the wall. It allows you to loosen the bolts on the back which then allows the TV to slide left or right on the horizontal supports (if you used the 4 beam installation). Also, you can install it on a wall without installing directly to a stud (even though it is recommended). My installation only had one bolt into a stud.. the rest where anchors. Came with 4 but I added 3 additional ones.

The installation lets you tweak the mount so much that you could compensate for some of the imperfections of the mount. Mine did not have any significant ones... It installed perfectly level.

answered 1 year, 3 months ago

Neriel

- Mannford, OK

Question

To adjust the tilt of the TV down do you have to loosen or release the lever on the mount or can you just push on the bottom of the TV to tilt it down

asked 10 months ago

Brian13grac

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

7 answers

Answers

answer 1

You must loosen the lever but that's not a big deal.

answered 9 months ago

an anonymous customer

- Minnesota

answer 2

I would recommend loosening at least one of the levers. Simply pushing on bottom of tv could damaging the set.

answered 9 months ago

Gigito3

- Houston

answer 3

Keep one lever tight and the other one little loose that will make it easier to tilt.

answered 10 months ago

Ranim

- 90275

answer 4

Matters how much you tighten the tilt control knobs.

answered 10 months ago

Yours423

- Lawrenceburg, KY

answer 5

You have to loosen the lever that holds it in that position, but no tools required to do so.

answered 10 months ago

John13713

- Hammonton

answer 6

adjust lever

answered 10 months ago

TGray3

- Wichita Kansas

answer 7

You can loosen the levers or adjust them based on the weight of the tv..

answered 10 months ago

SnookJ

- McComb, MS

Question

will this item pull out from wall and swival left or right to view from same wall as mounting?

asked 1 year, 1 month ago

an anonymous customer

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

7 answers

Answers

answer 1

yes

answered 9 months ago

an anonymous customer

- Minnesota

answer 2

Yes it has a lot more ability to swivel than I imagined

answered 1 year ago

Socal104

answer 3

yes.

answered 1 year, 1 month ago

kineticnrg

- Pulaski, WI

answer 4

It will pull out, swing left or right and also tilt forward or back.

answered 1 year, 1 month ago

steevano61

- Olympia, WA

answer 5

Yes, it will. View the video on the WalMart website where it is being sold.

answered 1 year, 1 month ago

an anonymous customer

- Willows, CA

answer 6

It sure will either way mounting it to swing out from the right or the left.

answered 1 year, 1 month ago

Ihatetheheat

- Yuma Az

answer 7

Yes, easily

answered 1 year, 1 month ago

valuemam

- colorado

Question

Will this single arm bracket tilt and swivel without using any tool?

asked 11 months ago

an anonymous customer

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

7 answers

Answers

answer 1

yes

answered 9 months ago

an anonymous customer

- Minnesota

answer 2

once installed correctly there are no tools needed to move/tile/swivel

answered 9 months ago

bigdoghyde

- nashville TN

answer 3

Yes, just move it to the desired position.

answered 10 months ago

Maryymayy

- Chanute, KS

answer 4

you dont need any tools to swivel or tilt the arm once its mounted on the wall. The tilt adjustment can be locked down either finger-tight or you can screw it down REALLY tight

answered 10 months ago

diesel1d

- glenview IL

answer 5

Yes...no tools necessary. There are some hand tightening knobs for tilt.

answered 10 months ago

Yours423

- Lawrenceburg, KY

answer 6

yes, but once in position, tighten to maintain structural integrity

answered 10 months ago

gator9266

- jax fl

answer 7

Once it is mounted securely, you just grap the TV and move it where you want it. It's easy!

answered 11 months ago

swiftjustice44

- USA

Question

cord hiding?

can this mount conceal the tv cords or does it still show?

asked 5 months, 3 weeks ago

needtoknow

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

7 answers

Answers

answer 1

I really doubt it. I'm going to check into the plastic "channels" they use to hide wall mounted electrical wires at Home Depot or Lowes.

answered 5 months, 1 week ago

hoofcare

answer 2

they still show

answered 5 months, 1 week ago

mommasher

answer 3

The plug needs to be directly behind the mount and cords will need to be tied or bundled, so they do not drop and show.

answered 5 months, 1 week ago

stoneglove

answer 4

It has ties to concele the wires and cords.

answered 5 months, 1 week ago

laneawake

answer 5

if they come out from behind the tv coming from a wall plug at baseboard height it can't hide

answered 5 months, 2 weeks ago

cboat

answer 6

The cords still show unless your outlets are directly behind the television. You will still need something to hide the cords.

answered 5 months, 2 weeks ago

l3rown

answer 7

They do show. I have a portable fireplace that hides most of mine, and can be concealed with an arrangement. They do make those wall strips to hide the cords.

answered 5 months, 2 weeks ago

massky

Question

I like the mount and am sure it will hold my 42 inch LED/LCD HDTV well.

My questions are: Can anyone tell me when and why the plastic washers
will need to be used? I can't seem to find any reason for them.
How deep should the screws that go into the back of the TV be for it to be a safe mounting? Thanks in advance!

asked 1 year, 3 months ago

curiousme2

on Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

7 answers

Answers

answer 1

The plastic washers are in case the included screws are too long and would go too deep into the tv. I used one washer for each screw mounting the plate to the TV just because I like using washers (lol) but they give you so many different screws, they probably wont be "needed".

answered 1 year, 2 months ago

Vaard

- Worcester, MA

answer 2

I didn't use the plastic pieces, not sure if they may be for a nicer finish on the plate mount screws that lock the plate onto the arm. Screws in the back seem to be a standard depth and flat ended.
I think it is a VESA mounting standard.

answered 1 year, 2 months ago

deern55

- Toledo, OH

answer 3

I didn't see any reason for the plastic mounts. Rule for screw depth is at least as deep as the screw is in diameter if the material is of similar type.

answered 1 year, 2 months ago

Lojeke

- Brighton,Michigan

answer 4

only need to washers to fill in the space of the screws. the screws must fit in tight to the tv for a secure fit. If you have space between the screws and the mount fill them in with washers then to make it a tight fit. Never leave space between the screws and the mounts. Avoid possible damage to you or your tv. Enjoy your mount I am......

answered 1 year, 3 months ago

beachbum2051959

- Wiildwood, NJ

answer 5

I mounted my 47 inch tv with this wall mount. The washers are would be used between the tv and small square piece that attaches to the tv if the screws were too long for your brand of tv. We didn't need to use any of the washers and the tv is secure.

answered 1 year, 3 months ago

NMgramaof2

- Lordsburg, NM

answer 6

Use the original screws that came with the TV for the stand. the only washers I used were for the mount onto the wall itself the steel ones..

answered 1 year, 3 months ago

simo2oh

- Canton Ohio

answer 7

The plastic spacers are for adapting to different TV backs where the adapter attaches.
The screws should be no longer than 12mm

answered 1 year, 3 months ago

HappyHomesteader

- Liberty, Idaho

1 of 10 total pages

Sign in to see details and track multiple orders.

Looking for Answers about Atlantic Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs?

Customer Questions & Answers for Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

Questions & Answers for Atlantic Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs

tv my

right or left turn from center extention all the way out

I want to mount this on my covered porch, however we will not be sitting in front, will the screen be able to turn right or left?

Will this mount work to recess my 46" samsung into the wall so I could swing it out to access the back for connections?

Can the mount be easily adjusted to keep the TV centered on the wall, left to right, if the studs you screw it into aren't centered on the wall?

To adjust the tilt of the TV down do you have to loosen or release the lever on the mount or can you just push on the bottom of the TV to tilt it down

will this item pull out from wall and swival left or right to view from same wall as mounting?

Will this single arm bracket tilt and swivel without using any tool?

cord hiding?

I like the mount and am sure it will hold my 42 inch LED/LCD HDTV well.

Customer Questions & Answers for

Single Arm Articulating Wall Mount for 37" to 64" Flat Panel TVs