Be prepared to throw an instant party anytime. With the Keg O Rator, you'll always have a keg on tap that's ready to dispense cold beer. This full-size, single-tap keg comes with black tower and guard rail with a durable black counter top. Its swivel casters make it mobile enough to roll around the house, pool area or anywhere else you're entertaining.
Questions & Answers for Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
Question
does this come with a co2 tank
asked 4 months ago
By
stratego
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
1 answer
Answers
answer 1
Yes, but it is a small 2.5 LB aluminum cylinder. These can be difficult to get filled where they only swap cylinders. I bought a more common 5 LB steel cylinder full, which I can now swap as needed only paying for the gas. The 2.5 LB cylinder was sent out to be filled, so I now have a back-up.
answered 3 months, 1 week ago
By
Beerwolf
- CT
Question
The coldest my new kegorator will get is 45 degrees. That's not cold enough. Any suggestions? Model KRS-2000 SERIES
asked 4 months, 4 weeks ago
By
SusiS
- MISSOURI
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
1 answer
Answers
answer 1
remove the screws holding the temp control, adjust the small screw inside (about 1 revolution clockwise). Reassemble.
answered 4 months, 3 weeks ago
By
EvilChemist
Question
Why do I have too much Foam?
I changed the regulator out and added more line, i'm at 12 p.s.i and temp is at 38 degrees. I can't get it to pour the beer right. HELP!!!!!
asked 7 months ago
By
Anonymous
- Virginia
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
1 answer
Answers
answer 1
First, what type of beer are you pouring? Deppending on the style of beer your PSI should be set between 9-25 PSI. The more line you have the more air gets into your beer line, creating more head. Also make sure to clean your lines once a month or eveery time you change the keg.
answered 4 months, 2 weeks ago
By
hulk11
- Chicago, IL
Question
My beer is tasting a little flat not bad but a little. My regulator doesn't really register a pressure. would this be the problem?
asked 9 months ago
By
ooyman
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
1 answer
Answers
answer 1
You need to change out the regulator to a duel pressure gauge. Also check your CO2 bottle. It should help regulate the CO2 and allow you to see just how much CO2 is left in the tank.
answered 4 months, 2 weeks ago
By
hulk11
- Chicago, IL
Question
what is the model number for Nostalgia Electrics kegerator
asked 11 months ago
By
justjuls
- DFW
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
1 answer
Answers
answer 1
KRS-2000
answered 10 months ago
By
jhesler
- Dublin, VA
Question
Internal dimensions
Can anyone give me the internal dimensions of this product?
Thanks!
asked 5 days ago
By
beermeister
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
0 answers
Answers
This question currently has no approved answers.
Question
Will this refrigerator hold a 5-gallon soda keg?
5-gallon soda kegs measure 26" tall and 9" in diameter.
asked 2 weeks ago
By
akbeachbody
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
0 answers
Answers
This question currently has no approved answers.
Question
Where can I get a keg refilled at???
It has to be in Middle Tn, preferrably.
asked 1 month, 2 weeks ago
By
Tiny0307
- Lafayette
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
0 answers
Answers
This question currently has no approved answers.
Question
can I get this with a stainless front
asked 2 months, 1 week ago
By
klagey
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs
0 answers
Answers
This question currently has no approved answers.
Question
does this model need a choke? if so where do i get one. it did not come in the box
asked 2 months, 3 weeks ago
By
jmmet
on Keg O Rator Beer Dispenser for 1/2, 1/4, and Mini-Barrel Kegs