These subs are 4 ohm single voice coil. Running 2 subs Parallel from a mono amp you want to run one of each leads to one sub, while wiring the two subs together. This will present a 2 ohm load to your amp. Remember you want to use an amp rated no more than 150 watts RMS, in this case because this sub is rated at 330 watts RMS. Most good amps will double true power while reading a 2 ohm load. So you should get a clean 300 watts RMS wiring this way. Also, most amps are 2 ohm stable but check your amp specs to determine the rate. For one sub use amp rated at half the RMS wattage of the sub to the top which is 330 RMS.
answered 4 years, 2 months ago
- Tacoma, WA